User:PxT

From Printrbottalk Wiki
Jump to: navigation, search

Printrbot backer #987. Contact me here on my talk page or via private message on the forum.

Documentation

Firmware Update Guide (PDF) Old Getting Started Guide (PDF)
Mostly superseded by the version available on the printrbot.com site, but kept here for reference.


Useful Firmware Links

Official firmware for all bots

If you use the Firmware Update App below then you don't need to download this separately.


Mac OS X Apps

Firmware Update App Download

Firmware Update App (Mac OS)
v3.0 - updated February 28, 2015

A Mac OS X app to facilitate updating or restoring the firmware on your Printrbot. It is self-contained and requires no other dependencies. Simply launch the app and it will download the latest available firmware as provided by Printrbot HQ and walk you through the steps to flash it onto your connected printer. You can also drag and drop any compiled HEX file onto the app icon and it will install that instead.

Tested on Mac OS X 10.6, 10.7, 10.8, 10.9 & 10.10. Please let me know if it fails to run for you on any particular OS version.

Source code

Arduino Build Environment Download Update App

Pre-configured Arduino build environment (Mac OS)

This is a pre-configured build environment suitable for compiling Marlin on a Mac with the Printrboard as a target. Before first use go to the Arduino → Preferences window and turn on "verbose output during compilation", then from the Tools menu choose Board → [BootloaderCDC]Teensylu/Printrboard

Tested on Mac OS X 10.8.4. Please report any success or failure on earlier versions.