This page is for pictures of assembled bots (along with as much detail as possible about them).
There is also a Printrbot group on Flickr where you can find pictures of assembled bots and related items.
Plexus' PB+
|
|
| Creator
|
Plexus
|
| Type
|
Printrbot+ with Power Tower
|
| URL
|
Link to the forum
|
| Finish
|
| Stained with Minwax and then a finished with a very light coat of satin spray.
|
| Mods
|
| Heatbed is insulated with neoprene (not pictured above).
|
craigthefabricator's PB+
|
|
| Creator
|
cragthefabricator
|
| Type
|
Printrbot+
|
| URL
|
Link to the forum
|
| Finish
|
| Green aniline dye, no top-coat.
|
| Mods
|
| None known.
|
PxT's Modded PB+ (Acme rods, LC extruder and more)
Alexmadsen1's PB with Cable Chain
|
|
| Creator
|
Alexmadsen1
|
| Type
|
Printrbot
|
| URL
|
Link to the forum
|
| Finish
|
| None.
|
| Mods
|
| Cable chains for Y and Z axes. In the above picture the Z axis chain is visible, but there is another chain below the platform as can be seen in the following detail shot.
|
k1nc81d's Bot with Improved Power Connector and Lighting
|
|
| Creator
|
k1nc81d
|
| Type
|
Printrbot+ with Power Tower and wood extruder
|
| URL
|
Link to the forum
|
| Finish
|
| None.
|
| Mods
|
| There is a custom cable with a custom connector to make the Power Tower to Bot connection clean as can be seen in the the following detail shots.
k1nc81d has also added:
- Custom LEDs (red ones on the bridge and a white spotlight at the print head)
- Switches to control the power and which LEDs are illuminated
- Rubber feet
- 1/4" painted AL heated platform (The build area is now 150x145x140)
|
