Connector reference for g2 legacy board

Talk about assembling your printer

Connector reference for g2 legacy board

Postby __Vinz__ » 2018-Dec-Mon-10-Dec

Hi there,

I am moving my Play to a printrboard G2 board via the legacy board but I realize I am missing the female connectors for hotend/thermistor (as I have to rewire them from original printrboard). However, I have a hard time finding their reference info.

Using a normal Printrboard BOM found online, I have found it's the Molex KK series which is used. The Molex website gives me this:
https://www.molex.com/molex/products/da ... USINGS.xml

Could SB confirm this is the right one?

Thanks!
  • 0

Printrbot Play Kit from Nov 2015 - Rev F5 printrboard
Y axis with heated bed upgrade - installed Oct 2016
Z lead screw 4-start + blower fan upgrade - installed April 2017
__Vinz__
Levelling print bed...
 
Posts: 39
Joined: 2016-May-Tue-23-May
Reputation: 0

Connector reference for g2 legacy board

Sponsor

Sponsor
 

Return to Assembly talk

Who is online

Users browsing this forum: No registered users and 0 guests