Leftover "3mm" filament [GONE]

Leftover "3mm" filament [GONE]

Postby RetireeJay » 2018-May-Tue-20-May

I've gone over to the dark side, using 1.75mm filament now, so I have some unused 3mm filament available. I'll give it to the first person who asks for all of it, just pay for shipping.

1) Unopened Taulman PLA, 1kg Through the plastic wrap, it has a silvery color (but maybe clear??)
2) Unused T-Glase (PETT), 1lb, clear Not plastic wrapped, but still inside its expanded black waffle belt.
3) Unopened Taulman 645 nylon, 1lb, "natural" white (in sealed bag with desiccant - keep nylon dry!)
4) Partially used NinjaFlex SemiFlex, approx .75 lb, white.
5) Partially used T-Glase (PETT), approx .75lb, clear.

The deal is all or nothing; if you have no use for a particular material then it's up to you to decide what to do with it.

EDIT: Found a taker.
  • 0

Printrbot Plus operational January 2013
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3
User avatar
RetireeJay
My next printer is...
 
Posts: 4941
Joined: 2013-Jan-Wed-13-Jan
Location: Greenville, SC
Reputation: 496

Leftover "3mm" filament [GONE]

Sponsor

Sponsor
 

Re: Leftover "3mm" filament

Postby Mooselake » 2018-May-Thu-09-May

Does this mean you're abandoning your plus? Don't you have a simple, too?

I'd jump on this, but despite planning to put the 3mm wades back on my plus the geared extruder/Ubis HF is working too well. I've got probably 10kg of 3mm in the hermetically sealed storage box so at this rate I'm covered until, well, probably the heat-death of the universe. It doesn't help that I've only fired up the Printrbot once or twice in the last year...

Kirk
  • 0

Modified KickStarter Classic Plus 7/2012
KS Thingybot Delta Pro 10/31/16
User avatar
Mooselake
My next printer is...
 
Posts: 3591
Joined: 2011-Dec-Tue-23-Dec
Location: Moose Swamp, Upper Michigan, USA
Reputation: 172

Re: Leftover "3mm" filament

Postby RetireeJay » 2018-May-Thu-10-May

Actually, I never had a Simple. And yes, I'm abandoning the Plus. There's not room in my setup for two printers.
  • 0

Printrbot Plus operational January 2013
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3
User avatar
RetireeJay
My next printer is...
 
Posts: 4941
Joined: 2013-Jan-Wed-13-Jan
Location: Greenville, SC
Reputation: 496


Return to Selling

Who is online

Users browsing this forum: Google Adsense [Bot] and 1 guest