Need a part laser cut or CNC'd

[orangefurball]

Hello!

I need just a couple of parts cut out of acrylic. The guys I use for my printer said it wouldn't be worth it for one-off parts.

Anyone have access to a laser cutter or CNC that can cut acrylic? The files are the .dxf on this

[Mooselake]

Looks a bit big for my K40. It's still torn apart for it's adjustable table mod project, which escalated into round 2 after buying the parts for the first attempt.

Have you tried printing the dxfs, spray gluing the paper to your acrylic, then cutting them with a fine tooth blade in a scroll saw? Shouldn't be too hard although iirc (been a few years) you need to cut faster than you think so it cuts rather than melting.

Kirk

[orangefurball]

[bbrown64]

Check for a local 3d print co-op. They sometimes have other print capabilities such as CNC. Here is a example of what I am referring to.

[upnxrawk]

I have a laser cutter with a bed size roughly 8.5x11.5

[orangefurball]

[upnxrawk]

I can do acrylic, plexi doesn't cut the best with a laser unfortunately. The thickest acrylic I've cut was 3/8 inches thick