Simple metal printed fine yeaterday, and then......

Discuss your first ever printrbot print

Simple metal printed fine yeaterday, and then......

Postby SteveS » 2015-Mar-Wed-22-Mar

Hi all, I got my bot yesterday, spent a lot of time to get it setup, printed a couple of items, everything was fine after I got it dialed in. This morning, I went to print a spool holder, and here is what happened.

image.jpg


I had to go back and repeat the setup, before it would print properly. My hotend temp was 210c, hotbed temp 60c, using sample pla I got with printer, print speed 50, same as yesterday.

Any ideas, or did I not supply enough, info.

Thanks in advance, really am enjoying 3D printing.
  • 0

You do not have the required permissions to view the files attached to this post.
SteveS
Loading filament...
 
Posts: 10
Joined: 2015-Mar-Tue-00-Mar
Reputation: 3

Simple metal printed fine yeaterday, and then......

Sponsor

Sponsor
 

Re: Simple metal printed fine yeaterday, and then......

Postby SpannerHands » 2015-Mar-Wed-14-Mar

Maybe you did not save the settings with the M500 Command? I have done this before as soon as you power off it goes back to the last saved settings...
  • 0

Everything for your 3D & Filament Needs.
3D Printing Filaments PLA, ABS, Wood, Transparent, Flexable and Technical Materials.
www.spannerhands.co.uk
User avatar
SpannerHands
Loading filament...
 
Posts: 23
Joined: 2015-Feb-Wed-16-Feb
Reputation: 3


Return to My first blob

Who is online

Users browsing this forum: No registered users and 1 guest