Understanding problem with axes please help

Talk generally about other printers

Understanding problem with axes please help

Postby nepaholic » 2014-Dec-Mon-12-Dec

Ho all

its been a whole since my last visit.
I have finally finished my smartrap printer but have some understanding problem with the axes.
I remember from my original pb and Jr that the x axis is going from left to right and the y axis from front to back, is that right?
Because if I look on the smartrap the axes seems to be different...

I ask because I have a strange problem that I need help with, my y axis (front to back) seem to be mirrored
Printed yesterday a screw and the thread go into the opposite direction and I don't no why

  • 0

Solid infill...
Posts: 201
Joined: 2012-Nov-Wed-11-Nov
Location: Stade/Germany
Reputation: 1

Understanding problem with axes please help



Re: Understanding problem with axes please help

Postby Fabrice974 » 2014-Dec-Tue-04-Dec

The creator of the smartrap made a mustake at the start
He define the x axis from back to front and the y , from left to right !
You just neef to rotate the smartrap 90deg clockwise to have the common orientation
It is not so important as soon as you have a direct coordonnate system
  • 0

Loading filament...
Posts: 15
Joined: 2014-Jul-Mon-19-Jul
Reputation: 2

Return to General

Who is online

Users browsing this forum: No registered users and 0 guests