I don't have a specific forum to nominate as a "Sticky" forum thread, but this reference is dearly needed someplace and should probably be a sticky.
My request is simple: Can someone please create a Sticky thread (maybe even make it part of the Wiki page?) that has for download a complete reference for all the M-Codes (and G-Codes?) possible for the most current firmware version for each Printrbot?
I would write a post that has this information but I can't seem to find any m-code references specifically for the Printrbot. I found one for the RepRap but that RepRap reference is missing codes specifically referred to on this site such as M210 and M211 for setting the max bed size which to me suggests that any codes sent to the Printrbot might be dependent on the firmware being used. Is that correct, and while we are waiting for this to happen, does any one have a link to where someone could find a complete list of all m-codes and g-codes possible for the Printrbot Simple (1405)?
Thanks
A complete M-Code and G-Code reference?
3 posts
• Page 1 of 1
Re: A complete M-Code and G-Code reference?
by RetireeJay » 2015-Feb-Fri-20-Feb
A sticky has been created.
- 0
Printrbot Plus operational January 2013
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
-
RetireeJay - My next printer is...
- Posts: 5014
- Joined: 2013-Jan-Wed-13-Jan
- Location: Greenville, SC
- Reputation: 498
Re: A complete M-Code and G-Code reference?
by thawkins » 2015-Feb-Fri-21-Feb
- 0
Jonbot+
225mm x 200mm - Heated Bed
RAMPS 1.4 running Marlin 1.1.0
Full Graphic display.
-------------------------------
Zen Toolworks CNC/3d printer
230mmx360mm bed
Dual j-head hotends.
Dual heated beds.
RAMPS 1.4 running Marlin 0.98
-------------------------------
Flashforge 3d Creator Pro
Dual Extruder
220x143x150mm
Mightyboard rev e, runnimg Sailfish 7.7r1234
-------------------------------
Photon, self designed printed printer.
225mm x 200mm - Heated Bed
RAMPS 1.4 running Marlin 1.1.0
Full Graphic display.
-------------------------------
Zen Toolworks CNC/3d printer
230mmx360mm bed
Dual j-head hotends.
Dual heated beds.
RAMPS 1.4 running Marlin 0.98
-------------------------------
Flashforge 3d Creator Pro
Dual Extruder
220x143x150mm
Mightyboard rev e, runnimg Sailfish 7.7r1234
-------------------------------
Photon, self designed printed printer.
-
thawkins - Print winner 2nd
- Posts: 1636
- Joined: 2013-Aug-Sun-10-Aug
- Location: Manila, Philippines
- Reputation: 172
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest