Page 1 of 1

Printrbot simple print parts for build

PostPosted: 2013-Dec-Wed-00-Dec
by undecided
Hi
I am looking, on behalf of my 11 year old son, for the printed parts he would need to build his own printer. If you live in the New England area and would be willing to help out a young enthusiast, please contact me. Or pass this note on to someone who might interested ;) I of course would be happy to pay for the plastic used.

thank you!!

Re: Printrbot simple print parts for build

PostPosted: 2013-Dec-Wed-21-Dec
by p99410
Well, you can buy it online for whatever model you want.
And you need to confirm the model of printer that you would like to make first.
Hope you succeed :)

Re: Printrbot simple print parts for build

PostPosted: 2013-Dec-Sat-04-Dec
by mdfast1
You would be better off with getting access to laser cutter since that's what all the parts on the Printrbot Simple are. There are no printed parts on the PB Simple.

Here are the laser cut files- http://printrbot.com/2013/11/12/updated ... ommercial/

please note, they are for personal use only and not to be sold.

Re: Printrbot simple print parts for build

PostPosted: 2013-Dec-Sat-21-Dec
by p99410
I thought he was just looking for reprap mendel or something. I suggest you to get a reprap model anyways.

Re: Printrbot simple print parts for build

PostPosted: 2013-Dec-Mon-18-Dec
by mdfast1
For an 11 year old, I would not recommend starting with a Reprap model unless he is mechanically inclined. Even some printrbot builds have stumped some more mature builders.

Re: Printrbot simple print parts for build

PostPosted: 2014-Feb-Fri-15-Feb
by Ethan
I live in the New England area if you are still interested.