II have 2 Printrbots, a Simple Metal and a Metal Plus. Due to life I havent really used them in about a year. I would like to keep these printers going for as long as possible. I know I can get printheads for them but over my time owning them I ve had a board or two go bad.
Is there a source for boards or another board that can work?
Any soure for Printrboards?
2 posts
• Page 1 of 1
Re: Any soure for Printrboards?
by RetireeJay » 2019-Mar-Mon-09-Mar
- 0
Printrbot Plus operational January 2013
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
-
RetireeJay - My next printer is...
- Posts: 5014
- Joined: 2013-Jan-Wed-13-Jan
- Location: Greenville, SC
- Reputation: 498
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest