Does anybody know the name, part number and source to buy some of this thermistor connector? The wire harness side of the connector is all I need but need 3 at least. That's the one encircled in red. The wire harness cable for the thermistor stressed out and the cable opens intermittently. I need to replace the whole length of the cable. The connector on the printrboard side is quite common, but the hotend side is what Í need. If I can get the name and part number, I can probably find the source on line. Can anybody help?
I'm in Chiba City, Japan (one of the suburban cities of Tokyo).
Thermistor Cable Connector [Source Found]
3 posts
• Page 1 of 1
Thermistor Cable Connector [Source Found]
by rigarashi » 2015-Aug-Mon-04-Aug
- 0
You do not have the required permissions to view the files attached to this post.
Last edited by rigarashi on 2015-Aug-Mon-20-Aug, edited 1 time in total.
- rigarashi
- Waiting to connect to printer...
- Posts: 8
- Joined: 2015-Aug-Thu-05-Aug
- Reputation: 0
Re: Thermistor Cable Connector
by RetireeJay » 2015-Aug-Mon-06-Aug
- 1
Printrbot Plus operational January 2013
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
-
RetireeJay - My next printer is...
- Posts: 5014
- Joined: 2013-Jan-Wed-13-Jan
- Location: Greenville, SC
- Reputation: 498
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest