Taulman Spool Webbing

Talk about materials used in 3D printing

Taulman Spool Webbing

Postby ktfergus » 2017-May-Mon-14-May

Last week, I was noodling around on the Taulman website when I came across this page. I've been printing with various Taulman products for nearly two years & never realized you weren't supposed to remove the mesh/webbing on their small spools.

I just wanted to post this so no one makes the same silly mistake...

-Kelly
  • 0

PrintrBot Model: 1403 (Simple Metal Assembled) :: DIY Heated Bed, with 305mm Extended X Axis
PrintrBot Model: 1403 (Simple Metal Assembled) :: 305mm x200mm DIY heated bed
PrintrBot Model: 1505 (Play) :: 100mm x 250mm DIY heated bed
PrintrBot Model: 1503 (Play) :: 100mm x 100mm DIY Heated bed
Latest Project :: Sisyphus Whirligig
User avatar
ktfergus
Printing skirt...
 
Posts: 161
Joined: 2015-Jan-Thu-14-Jan
Location: Los Osos, CA
Reputation: 16

Taulman Spool Webbing

Sponsor

Sponsor
 

Re: Taulman Spool Webbing

Postby RetireeJay » 2017-May-Mon-14-May

I've been taking it off too!
  • 0

Printrbot Plus operational January 2013
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3
User avatar
RetireeJay
My next printer is...
 
Posts: 4944
Joined: 2013-Jan-Wed-13-Jan
Location: Greenville, SC
Reputation: 496

Re: Taulman Spool Webbing

Postby Mooselake » 2017-May-Mon-14-May

I think PxT told me to keep it on, although it might have been Dr. Google

Kirk
  • 0

Modified KickStarter Classic Plus 7/2012
KS Thingybot Delta Pro 10/31/16
User avatar
Mooselake
My next printer is...
 
Posts: 3591
Joined: 2011-Dec-Tue-23-Dec
Location: Moose Swamp, Upper Michigan, USA
Reputation: 172

Re: Taulman Spool Webbing

Postby PxT » 2017-May-Tue-10-May

Haha, oops. Don't think it was me because I've been taking it off. This has got to be a pretty common "mistake". I mean it's not even really a mistake because obviously people have been able to print just fine without the webbing.
  • 0

User avatar
PxT
Print complete...
 
Posts: 1339
Joined: 2011-Dec-Mon-16-Dec
Location: Sacramento, CA
Reputation: 97


Return to Material talk

Who is online

Users browsing this forum: No registered users and 4 guests