Page 1 of 1

Printing in slime green and bright blue pla from printrbot

PostPosted: 2016-Jan-Tue-06-Jan
by 3DOctopus
I have a printrbot simple metal. I got a bunch of PLA colors from the printrbot site. Everything I bought worked fine except for the blue and green colors. They just don't stick to the bed. All the other colors are fine. Ive tried using glue as well, but no luck. Can somebody help with printing in blue and green??


NOTE: I have noticed that the blue and green look different from the other colors. They are less shiny, and they are on different spools.