Source for 6" x 6" x 5 mil Kapton Squares

[matthewcroce]

Hello, I'm trying to source the Kapton squares that Printrbot used to sell on their site; I have a Simple Metal with a Heated Bed, so I need a 6" x 6" square; I like the 5 mil thickness. I've looked online and found things that are CLOSE, but they're either thinner, or not the right size and I'll have to cut them down. Not a big deal, but I'd like to buy the right size if I can. Sources?

Thanks!

[Mooselake]

Look into PEI instead of Kapton. You might need to trim it (use a razor blade, xacto knife, etc), but it's easy.

Kirk