Source for 6" x 6" x 5 mil Kapton Squares

Talk about materials used in 3D printing

Source for 6" x 6" x 5 mil Kapton Squares

Postby matthewcroce » 2019-Oct-Sat-14-Oct

Hello, I'm trying to source the Kapton squares that Printrbot used to sell on their site; I have a Simple Metal with a Heated Bed, so I need a 6" x 6" square; I like the 5 mil thickness. I've looked online and found things that are CLOSE, but they're either thinner, or not the right size and I'll have to cut them down. Not a big deal, but I'd like to buy the right size if I can. Sources?

Thanks!
  • 0

matthewcroce
Waiting to connect to printer...
 
Posts: 1
Joined: 2019-Sep-Tue-22-Sep
Reputation: 0

Source for 6" x 6" x 5 mil Kapton Squares

Sponsor

Sponsor
 

Re: Source for 6" x 6" x 5 mil Kapton Squares

Postby Mooselake » 2019-Oct-Sun-12-Oct

Look into PEI instead of Kapton. You might need to trim it (use a razor blade, xacto knife, etc), but it's easy.

Kirk
  • 0

Modified KickStarter Classic Plus 7/2012
KS Thingybot Delta Pro 10/31/16
User avatar
Mooselake
My next printer is...
 
Posts: 3614
Joined: 2011-Dec-Tue-23-Dec
Location: Moose Swamp, Upper Michigan, USA
Reputation: 177


Return to Material talk

Who is online

Users browsing this forum: No registered users and 1 guest

cron