Taulman Spool Webbing

Talk about materials used in 3D printing

Taulman Spool Webbing

Postby ktfergus » 2017-May-Mon-14-May

Last week, I was noodling around on the Taulman website when I came across this page. I've been printing with various Taulman products for nearly two years & never realized you weren't supposed to remove the mesh/webbing on their small spools.

I just wanted to post this so no one makes the same silly mistake...

-Kelly
  • 0

PrintrBot Model: 1403 (Simple Metal Assembled) :: DIY Heated Bed, with 305mm Extended X Axis
PrintrBot Model: 1403 (Simple Metal Assembled) :: 305mm x200mm DIY heated bed
PrintrBot Model: 1505 (Play) :: 100mm x 250mm DIY heated bed
Latest Project: Arduino Controlled Power Assist Bot
User avatar
ktfergus
Waiting for printbed temp...
 
Posts: 125
Joined: 2015-Jan-Thu-14-Jan
Location: Los Osos, CA
Reputation: 13

Taulman Spool Webbing

Sponsor

Sponsor
 

Re: Taulman Spool Webbing

Postby RetireeJay » 2017-May-Mon-14-May

I've been taking it off too!
  • 0

Printrbot Plus operational January 2013
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
User avatar
RetireeJay
My next printer is...
 
Posts: 4709
Joined: 2013-Jan-Wed-13-Jan
Location: Greenville, SC
Reputation: 477

Re: Taulman Spool Webbing

Postby Mooselake » 2017-May-Mon-14-May

I think PxT told me to keep it on, although it might have been Dr. Google

Kirk
  • 0

Modified KickStarter Classic Plus 7/2012
KS Thingybot Delta Pro 10/31/16
User avatar
Mooselake
My next printer is...
 
Posts: 3473
Joined: 2011-Dec-Tue-23-Dec
Location: Moose Swamp, Upper Michigan, USA
Reputation: 170

Re: Taulman Spool Webbing

Postby PxT » 2017-May-Tue-10-May

Haha, oops. Don't think it was me because I've been taking it off. This has got to be a pretty common "mistake". I mean it's not even really a mistake because obviously people have been able to print just fine without the webbing.
  • 0

User avatar
PxT
Print complete...
 
Posts: 1331
Joined: 2011-Dec-Mon-16-Dec
Location: Sacramento, CA
Reputation: 96


Return to Material talk

Who is online

Users browsing this forum: No registered users and 1 guest