Simple Metal first print, what should I change?

Discuss your first ever printrbot print

Simple Metal first print, what should I change?

Postby ZettabyteGamer » 2015-Jan-Wed-03-Jan

Well I lied, it's my first useful print not the first. Printed at 208 C with printrbot PLA. The holes on the shroud were way to small and it took a while with a knife to drill them to size. I'm thinking of changing the temp to 205, or maybe even 200. You guys think that would help improve the quality at all?
  • 0

You do not have the required permissions to view the files attached to this post.
ZettabyteGamer
Waiting to connect to printer...
 
Posts: 3
Joined: 2015-Jan-Tue-01-Jan
Reputation: 0

Simple Metal first print, what should I change?

Sponsor

Sponsor
 

Re: Simple Metal first print, what should I change?

Postby RetireeJay » 2015-Jan-Wed-08-Jan

That print actually looks pretty good.
The diameter of holes is a well-known problem. Even the big commercial printers don't produce absolutely accurate holes.

But that said, the first things to look at are:

1) Extruder calibration (The steps per mm of filament going in to the extruder. Don't use a stock value, because machines differ; measure it yourself and get it right.)

2) ACCURATE measurement of your actual filament diameter (cut off two or three pieces about 20mm long, and measure with digital calipers for both the smallest "diameter" and the largest "diameter" on each piece; then take the average)

3) Tweaking the "Extrusion Multiplier" to get the most accurate dimensions possible.

Changing the extrusion temperature will have a very slight effect compared to the above three - which are first-order effects.
  • 0

Printrbot Plus operational January 2013
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3
User avatar
RetireeJay
My next printer is...
 
Posts: 4991
Joined: 2013-Jan-Wed-13-Jan
Location: Greenville, SC
Reputation: 498

Re: Simple Metal first print, what should I change?

Postby subether » 2015-Jan-Wed-23-Jan

That's a lot better than the first print mine cranked out.

I have a drill to fix the small hole problem. :)
  • 0

User avatar
subether
Levelling print bed...
 
Posts: 40
Joined: 2014-Dec-Mon-21-Dec
Location: Arizona, US, Sol3, Milky Way, Universe 5218673
Reputation: 2

Re: Simple Metal first print, what should I change?

Postby orkboy59 » 2015-Feb-Thu-16-Feb

The holes on mine were small too. I just drilled them out. The rest of the print turned out pretty good though.
  • 0

orkboy59
Waiting to connect to printer...
 
Posts: 4
Joined: 2015-Feb-Fri-02-Feb
Reputation: 0


Return to My first blob

Who is online

Users browsing this forum: No registered users and 2 guests