I'm very interested with Your Printrbot Jr. (V2).
I'm beginner to 3D Prining.
I have some questions before buying your printer.
1. Filament compatibility
Any other 1.75mm PLA or ABS filament can be used your Printrbot Jr. (V2).
without changing Spool?
I want to buy PLA or ABS filament in Korea because of cost.
Any other problems for printing with other PLA or ABS product?
2. Service Parts
Because I'm in Korea, I have trouble to buy your Parts & Accessories.
I hope you recommend your Parts & Accessories for Printrbot Jr. (V2)
such as 1.75mm Hot End, Tips(0.4mm). Any other else?
3. CAD/3D modeling software recommendation for your Printer
4. Shipping Charge and Good Option(for UPS)
In case Printrbot Jr. (V2)( ? kg) + 4 PLA filanent(4 kg) + Other Parts(about 1 kg)
How much shipping charge from Your site to Korea(SEOUL) ?
Thank you very much if you may say advice by addition to purchase your printer.
Ask Buying Tips for Printrbot Jr. (V2).
3 posts
• Page 1 of 1
Re: Ask Buying Tips for Printrbot Jr. (V2).
by RetireeJay » 2013-Oct-Tue-09-Oct
Using the forum's messaging feature, I have forwarded your query to David@printrbot.
- 0
Printrbot Plus operational January 2013
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
-
RetireeJay - My next printer is...
- Posts: 5014
- Joined: 2013-Jan-Wed-13-Jan
- Location: Greenville, SC
- Reputation: 498
Re: Ask Buying Tips for Printrbot Jr. (V2).
by David@Printrbot » 2013-Nov-Mon-23-Nov
- 0
Printrbot: Dominate Your Prints!
-
David@Printrbot - PBHQ Official
- Posts: 338
- Joined: 2012-Dec-Tue-23-Dec
- Reputation: 7
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest