Free Filament : ABS & Ninja Flex

Free Filament : ABS & Ninja Flex

Postby ktfergus » 2017-May-Wed-15-May

Since I've switched over to PETG & sainSmart's TPU I haven't had any use for my old rolls of ABS & Ninja Flex (both 1.75mm). If anyone wants them, just pay for shipping & I'll get them headed your way. I think I can get everything in a large Priority mail box, so shipping should be under $20 [EDIT] I just double checked a large Priority box & I'll probably be lucky to squeeze three rolls in one, so shipping is definitely TBD.

The "water" Ninja Flex is unused & the I only used about 25% of the "lava"

Image
Image

There are 4 rolls of Hatchbox ABS: Transparent green, black, transparent black, & silver.

Image

I also have a number of ABS samples I'll throw in, as well.

-Kelly
  • 1

PrintrBot Model: 1403 (Simple Metal Assembled) :: DIY Heated Bed, with 305mm Extended X Axis
PrintrBot Model: 1403 (Simple Metal Assembled) :: 305mm x200mm DIY heated bed
PrintrBot Model: 1505 (Play) :: 100mm x 250mm DIY heated bed
Latest Project: Flux Capacitor
User avatar
ktfergus
Waiting for printbed temp...
 
Posts: 135
Joined: 2015-Jan-Thu-14-Jan
Location: Los Osos, CA
Reputation: 14

Free Filament : ABS & Ninja Flex

Sponsor

Sponsor
 

Re: Free Filament : ABS & Ninja Flex

Postby lairdb » 2017-May-Fri-18-May

Kelly, I'll take the Ninjaflex with thanks -- pm me a postage cost and a paypal address.

I have a colleague who's out today but might take the ABS (I could probably be successful with ABS if I tried, but after a few hassles I decided to set it aside) -- but if someone else speaks up first, they should get it.

--LairdB
  • 0

Simple Metal Kit, heated bed. Mods: blower fan. Usually PLA on kapton with AquaNet. Usually Cura 15.04.6.
lairdb
I'm an end stop.
 
Posts: 71
Joined: 2015-May-Tue-13-May
Reputation: 2

Re: Free Filament : ABS & Ninja Flex

Postby lairdb » 2017-May-Wed-17-May

I have received the NinjaFlex (and some ABS samples) from ktfergus/Kelly for the cost of postage. He is a Good Dude.
  • 0

Simple Metal Kit, heated bed. Mods: blower fan. Usually PLA on kapton with AquaNet. Usually Cura 15.04.6.
lairdb
I'm an end stop.
 
Posts: 71
Joined: 2015-May-Tue-13-May
Reputation: 2

Re: Free Filament : ABS & Ninja Flex

Postby mcdader » 2017-Jun-Tue-12-Jun

Received some ABS, Thanks
  • 0

mcdader
Loading filament...
 
Posts: 20
Joined: 2015-Jan-Wed-00-Jan
Reputation: 0

Re: Free Filament : ABS & Ninja Flex

Postby ktfergus » 2017-Jun-Tue-12-Jun

No problem. Hope the filament works out for you guys.

I have one full roll of the silver & half a roll of the black ABS left. If anyone wants them, it'll be $13 to ship.

-Kelly
  • 0

PrintrBot Model: 1403 (Simple Metal Assembled) :: DIY Heated Bed, with 305mm Extended X Axis
PrintrBot Model: 1403 (Simple Metal Assembled) :: 305mm x200mm DIY heated bed
PrintrBot Model: 1505 (Play) :: 100mm x 250mm DIY heated bed
Latest Project: Flux Capacitor
User avatar
ktfergus
Waiting for printbed temp...
 
Posts: 135
Joined: 2015-Jan-Thu-14-Jan
Location: Los Osos, CA
Reputation: 14


Return to Selling

Who is online

Users browsing this forum: No registered users and 1 guest

cron