HolderAsPrinted.jpgHolderInUse.jpg
To be honest, I printed this on my Prusa, but it could have been on the Printrbot.
Mach 3 Razor caddy
3 posts
• Page 1 of 1
Mach 3 Razor caddy
by RetireeJay » 2019-Feb-Tue-15-Feb
The old "Sensor" razor came with a caddy that held the razor and a cassette of 5 cartridges. But the new Mach 3 doesn't come with a case. This project provides a caddy, useful both in the bathroom and for traveling. The STL is at
HolderAsPrinted.jpgHolderInUse.jpg
To be honest, I printed this on my Prusa, but it could have been on the Printrbot.
HolderAsPrinted.jpgHolderInUse.jpg
To be honest, I printed this on my Prusa, but it could have been on the Printrbot.
- 0
You do not have the required permissions to view the files attached to this post.
Printrbot Plus operational January 2013
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
-
RetireeJay - My next printer is...
- Posts: 5014
- Joined: 2013-Jan-Wed-13-Jan
- Location: Greenville, SC
- Reputation: 498
- novice
- Waiting for extruder temp...
- Posts: 84
- Joined: 2018-Jan-Sat-18-Jan
- Location: South of Up North
- Reputation: 4
Re: Mach 3 Razor caddy
by RetireeJay » 2019-Feb-Wed-15-Feb
The filament is 3DXTech "MAX-G" PETG.
But I do have other things I printed with the Printrbot which have equally nice finishes. At that time I was using Taulman's "T-Glase".
But I do have other things I printed with the Printrbot which have equally nice finishes. At that time I was using Taulman's "T-Glase".
- 0
Printrbot Plus operational January 2013
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
-
RetireeJay - My next printer is...
- Posts: 5014
- Joined: 2013-Jan-Wed-13-Jan
- Location: Greenville, SC
- Reputation: 498
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest