Mach 3 Razor caddy

Show off your projects and talk about them

Mach 3 Razor caddy

Postby RetireeJay » 2019-Feb-Tue-15-Feb

The old "Sensor" razor came with a caddy that held the razor and a cassette of 5 cartridges. But the new Mach 3 doesn't come with a case. This project provides a caddy, useful both in the bathroom and for traveling. The STL is at https://www.thingiverse.com/thing:3439270
HolderAsPrinted.jpg
HolderInUse.jpg

To be honest, I printed this on my Prusa, but it could have been on the Printrbot. ;)
  • 0

You do not have the required permissions to view the files attached to this post.
Printrbot Plus operational January 2013
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
User avatar
RetireeJay
My next printer is...
 
Posts: 4995
Joined: 2013-Jan-Wed-13-Jan
Location: Greenville, SC
Reputation: 498

Mach 3 Razor caddy

Sponsor

Sponsor
 

Re: Mach 3 Razor caddy

Postby novice » 2019-Feb-Wed-09-Feb

RetireeJay wrote:....To be honest, I printed this on my Prusa, but it could have been on the Printrbot. ;)


Hmmm....I don't think I've ever gotten that smooth of a finish on a printrbot. What filament is that?
  • 0

novice
Waiting for extruder temp...
 
Posts: 83
Joined: 2018-Jan-Sat-18-Jan
Location: South of Up North
Reputation: 4

Re: Mach 3 Razor caddy

Postby RetireeJay » 2019-Feb-Wed-15-Feb

The filament is 3DXTech "MAX-G" PETG.
But I do have other things I printed with the Printrbot which have equally nice finishes. At that time I was using Taulman's "T-Glase".
  • 0

Printrbot Plus operational January 2013
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
User avatar
RetireeJay
My next printer is...
 
Posts: 4995
Joined: 2013-Jan-Wed-13-Jan
Location: Greenville, SC
Reputation: 498


Return to Showcase!

Who is online

Users browsing this forum: No registered users and 1 guest