Have not really done much with my printer in a while, but my son had me print out some adapters for different lenses for his HTC Vive (no z banding at that point it time) and that got me printing again with my modded Printrbot 1405. I decided to finally give PETG a try and it turned out really good.
esun-petg-vase-2.jpg
esun-petg-vase-3.jpg
Sliced the model from Thingiverse (thing:2376777) with MatterControl and printed the g-code from Octopi. Used glue stick on the heated bed. Printed with a bed temp of 80c and E3D v6 at 245c.
The covers I made for my power supplies (one for the printer and one for the bed) have horrible z banding. It perfectly matches my lead screw, but for those it does not really matter.
First eSun PETG print
1 post
• Page 1 of 1
First eSun PETG print
by ChefScott » 2018-May-Wed-20-May
- 1
You do not have the required permissions to view the files attached to this post.
-
ChefScott - Waiting for printbed temp...
- Posts: 147
- Joined: 2014-Apr-Fri-21-Apr
- Reputation: 19
1 post
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests