Battery holder for Icom BP-272Li

Show off your projects and talk about them

Battery holder for Icom BP-272Li

Postby Jack Crow » 2018-Apr-Sat-18-Apr

Hi all,
Got a couple of Icom ID-51 hand held radios. The client wanted it modified in transmit frequency range for use with his Civil Air Patrol squadron.

So while they were here I got to looking at the battery housing and thought it would be a good subject for making one of my holders.

4-21-2018 001.JPG


This is the over view. Radio and the holder.

4-21-2018 002.JPG


This is from the footer looking toward the top. See how I had to add a slope to make it match with the slope on the front of the battery its self.

4-21-2018 003.JPG

This is the side view. Again with the slope near the top more or less matches the shape of the battery pack.

4-21-2018 004.JPG

This is the bottom view. It shows the holes for the terminals and four mounting holes.

4-21-2018 005.JPG

View from the top. It has openings for the latch pins that are part of the battery housing.

4-21-2018 006.JPG


The bottom footer. Took some doing to get it all to notch and fit properly.

Hope you like it.
Jack Crow
  • 0

You do not have the required permissions to view the files attached to this post.
Jack Crow
Waiting for printbed temp...
 
Posts: 131
Joined: 2017-Apr-Thu-18-Apr
Location: Virginia Beach, Virginia, USA
Reputation: 6

Battery holder for Icom BP-272Li

Sponsor

Sponsor
 

Return to Showcase!

Who is online

Users browsing this forum: No registered users and 1 guest

cron