My patent attorney tells me that I can share inventions that are in patent-pending status. And I have some that will never be patented.
None of these are actually for sale now (well, I would sell you a Switch Minder made on my printer - but if you are reading this forum can make your own) - so I'm posting the link here in "Showcase".
The white plunger seen in the video was printed on my Plus. It was VERY difficult working with the SemiFlex filament to get that thing to print at all. The black version in some still photos was produced by a commercial 3D printer using a different process; it looks great but cost an arm and a leg.
Some things I've been working on
2 posts
• Page 1 of 1
Some things I've been working on
by RetireeJay » 2018-Mar-Wed-13-Mar
- 0
Printrbot Plus operational January 2013
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
-
RetireeJay - My next printer is...
- Posts: 5014
- Joined: 2013-Jan-Wed-13-Jan
- Location: Greenville, SC
- Reputation: 498
Re: Some things I've been working on
by Jack Crow » 2018-Mar-Wed-16-Mar
J
That is some clever stuff.
I like. Shows good thinking.
Go earn some bucks, have fun.
Jack Crow
That is some clever stuff.
I like. Shows good thinking.
Go earn some bucks, have fun.
Jack Crow
- 0
- Jack Crow
- Waiting for printbed temp...
- Posts: 135
- Joined: 2017-Apr-Thu-18-Apr
- Location: Virginia Beach, Virginia, USA
- Reputation: 7
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests