First eSun PETG print

Show off your projects and talk about them

First eSun PETG print

Postby ChefScott » 2018-May-Wed-20-May

Have not really done much with my printer in a while, but my son had me print out some adapters for different lenses for his HTC Vive (no z banding at that point it time) and that got me printing again with my modded Printrbot 1405. I decided to finally give PETG a try and it turned out really good.

esun-petg-vase-2.jpg


esun-petg-vase-3.jpg


Sliced the model from Thingiverse (thing:2376777) with MatterControl and printed the g-code from Octopi. Used glue stick on the heated bed. Printed with a bed temp of 80c and E3D v6 at 245c.

The covers I made for my power supplies (one for the printer and one for the bed) have horrible z banding. It perfectly matches my lead screw, but for those it does not really matter.
  • 1

You do not have the required permissions to view the files attached to this post.
User avatar
ChefScott
Waiting for printbed temp...
 
Posts: 144
Joined: 2014-Apr-Fri-21-Apr
Reputation: 19

First eSun PETG print

Sponsor

Sponsor
 

Return to Showcase!

Who is online

Users browsing this forum: No registered users and 1 guest