Wide Flat object help (delamination on second layer)

Discussions about CAD use and designing

Wide Flat object help (delamination on second layer)

Postby Sablebadger » 2015-Feb-Mon-00-Feb

I'm building a Tardis Playset for my son, and I designed a big wall piece to print on my Metal Plus with Heated bed.

For some reason the first layer prints fine, but the second layer doesn't stick to the first in the middle of the print. This object is like 200mm x 142mm, so the first layer takes forever, then the second layer is stringy and doesn't really latch onto the first layer, which the third layer chews up.

I've never had this problem before, but I've never printed anything like this in size before (Just now starting to push the edge of what my Plus can do).

Any help on how to design my way out of this problem?
  • 0

Sablebadger
Levelling print bed...
 
Posts: 32
Joined: 2014-Jan-Sun-20-Jan
Reputation: 0

Wide Flat object help (delamination on second layer)

Sponsor

Sponsor
 

Re: Wide Flat object help (delamination on second layer)

Postby RetireeJay » 2015-Feb-Mon-08-Feb

A picture might help. Can you upload one or two?
  • 0

Printrbot Plus operational January 2013
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
User avatar
RetireeJay
My next printer is...
 
Posts: 5014
Joined: 2013-Jan-Wed-13-Jan
Location: Greenville, SC
Reputation: 498


Return to CAD & design

Who is online

Users browsing this forum: No registered users and 1 guest