by ktfergus » 2017-Nov-Sun-11-Nov
In this I outlined the process I went thru making my own heated bed using a battery pad heater for cars. No wiring, soldering, or new power supply needed. I have a similar set up on each of my printers & have been been printing PETG, TPU, PLA happily for 2+ years. With some printed spacers you could probably keep the stock bed & do something similar for less than $50.
-Kelly
PrintrBot Model: 1403 (Simple Metal Assembled) ::
PrintrBot Model: 1403 (Simple Metal Assembled) :: 305mm x200mm DIY heated bed
PrintrBot Model: 1505 (Play) :: 100mm x 250mm DIY heated bed
PrintrBot Model: 1503 (Play) :: 100mm x 100mm DIY Heated bed
Latest Project :: Sisyphus Whirligig