Source code for Printrbot Rev F Printrboard

Talk about using software tools, drivers etc

Source code for Printrbot Rev F Printrboard

Postby ChinookTx » 2016-May-Mon-14-May

Where does one get the source code for the Printrbot Rev F Printrboard? I'd like to roll my own with my calibrated values but can't seem to find a definite link to the firmware.

Tanks!
  • 0

---
PrintrBot Simple Metal
E3Dv6 Hotend @0.4mm
Upgraded to heated bed + XY extension from Matrix Precision
ChinookTx
Loading filament...
 
Posts: 20
Joined: 2016-Apr-Sat-07-Apr
Reputation: 1

Source code for Printrbot Rev F Printrboard

Sponsor

Sponsor
 

Re: Source code for Printrbot Rev F Printrboard

Postby RetireeJay » 2016-May-Mon-15-May

I think this is one valid place: https://github.com/Printrbot/Marlin/blob/printrbot-prod/Marlin/Configuration.h

I don't know what happened to the link that used to be on Printrbot.com; they had a table there where you could select which printer type you were using and get the source code pre-configured. But where did it go????

Anyway, I have to ask what you mean about using your own "calibrated values." The calibration values for steps/mm in X, Y, Z, and E are all stored in EEPROM. Also, the printable dimensions are there. And a ton of other things; issue an M503 command to your printer and examine the return data that you get. You only need to edit source code and re-compile if (A) something you want to change is not in the EEPROM, or (B) if you are going into some kind of production mode where you want to reproduce your own version of calibrated settings on more than one printer.
  • 0

Printrbot Plus operational January 2013
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
User avatar
RetireeJay
My next printer is...
 
Posts: 4864
Joined: 2013-Jan-Wed-13-Jan
Location: Greenville, SC
Reputation: 483

Re: Source code for Printrbot Rev F Printrboard

Postby ChinookTx » 2016-May-Mon-17-May

Thanks, looks legit enough! All the values appear to map to what I have right now... Thanks again!
  • 0

---
PrintrBot Simple Metal
E3Dv6 Hotend @0.4mm
Upgraded to heated bed + XY extension from Matrix Precision
ChinookTx
Loading filament...
 
Posts: 20
Joined: 2016-Apr-Sat-07-Apr
Reputation: 1


Return to Software usage talk

Who is online

Users browsing this forum: No registered users and 2 guests

cron