End command line

Talk about using software tools, drivers etc

End command line

Postby calex_fr » 2015-Nov-Sun-10-Nov

Hi every body.

I have a little problem, at the end of my prints the head go home and some time touch my print and scratch it!
I would to know if it will be possible to program automatically Z+10 at the end to go up the head ?

Regards

Alex
  • 0

Last edited by calex_fr on 2015-Nov-Sun-11-Nov, edited 1 time in total.
alex from France

Printrbot Simple Metal with heat bed, extruder V2 and Ubis 13 upgrades
and second PB Simple Metal extruder V2.
User avatar
calex_fr
Levelling print bed...
 
Posts: 36
Joined: 2014-Jul-Mon-06-Jul
Location: France
Reputation: 0

End command line

Sponsor

Sponsor
 

Re: End command line

Postby RetireeJay » 2015-Nov-Sun-10-Nov

Bien sur (Definitely)

Here is my end code:
M104 S0 ; turn off temperature
G91 ; set relative positioning
G1 Z10 ;Raise the head 10mm above the object
G28 X0 ; home X axis
M84 ; disable motors

By the way, I hope you and your family and friends are doing OK. I pray for France, and also for the defeat of terrorism.
  • 0

Printrbot Plus operational January 2013
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3
User avatar
RetireeJay
My next printer is...
 
Posts: 4929
Joined: 2013-Jan-Wed-13-Jan
Location: Greenville, SC
Reputation: 494

Re: End command line

Postby calex_fr » 2015-Nov-Sun-11-Nov

RetireeJay wrote:By the way, I hope you and your family and friends are doing OK. I pray for France, and also for the defeat of terrorism.


thank you Jay, my family and friends are OK but we are very sad.
  • 0

alex from France

Printrbot Simple Metal with heat bed, extruder V2 and Ubis 13 upgrades
and second PB Simple Metal extruder V2.
User avatar
calex_fr
Levelling print bed...
 
Posts: 36
Joined: 2014-Jul-Mon-06-Jul
Location: France
Reputation: 0


Return to Software usage talk

Who is online

Users browsing this forum: Bing [Bot] and 1 guest