Talk about using software tools, drivers etc
I was looking into switching over and using CURA instead of Repetier. Am I able to just select the V2.1 profile and just be able to print away or will I need to input some additional settings into CURA?
- Waiting to connect to printer...
- Posts: 2
- Joined: 2016-Nov-Tue-12-Nov
- Reputation: 0
I select printrbot metal and then type in the size of the bot manually. If you don't have an auto level sensor you'll have to take that out of the start Gcode.
G21 ;metric values
G90 ;absolute positioning
M82 ;set extruder to absolute mode
M106 ;start with the fan on
G28 X0 Y0 ;home X/Y
G28 Z0 ;home Z
G92 E0 ;zero the extruded length
G29 ;initiate auto bed leveling sequence
M107 ;start with the fan off
Thats my start Gcode for Cura.
- Printing skirt...
- Posts: 156
- Joined: 2013-Dec-Wed-12-Dec
- Reputation: 7
Return to Software usage talk
Who is online
Users browsing this forum: No registered users and 1 guest