Old firmware for Rev D

Newbie talk about software tools, drivers, etc

Old firmware for Rev D

Postby aerogeek » 2018-Jan-Mon-16-Jan

hi all,

it looks like i have corrupted the firmware on my printrbot plus V1/LC by shutting down mid running or heating up. i need to re-flash it but cant find the legacy firmware anymore (obviously my bot is too old :( now for PB to support.

Does anyone have a working version of the firmware of for the printrbot rev D? if not what could be a good work around? is it feasible to download latest marlin and select correct options for printrbot plus with no autoleveling etc?
  • 0

aerogeek
I'm an end stop.
 
Posts: 62
Joined: 2013-Jan-Sat-14-Jan
Reputation: 0

Old firmware for Rev D

Sponsor

Sponsor
 

Re: Old firmware for Rev D

Postby RetireeJay » 2018-Jan-Mon-16-Jan

See my answer in your other post.
  • 0

Printrbot Plus operational January 2013
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
User avatar
RetireeJay
My next printer is...
 
Posts: 4901
Joined: 2013-Jan-Wed-13-Jan
Location: Greenville, SC
Reputation: 491


Return to Newbie talk

Who is online

Users browsing this forum: No registered users and 1 guest