Old firmware for Rev D

Newbie talk about software tools, drivers, etc

Old firmware for Rev D

Postby aerogeek » 2018-Jan-Mon-16-Jan

hi all,

it looks like i have corrupted the firmware on my printrbot plus V1/LC by shutting down mid running or heating up. i need to re-flash it but cant find the legacy firmware anymore (obviously my bot is too old :( now for PB to support.

Does anyone have a working version of the firmware of for the printrbot rev D? if not what could be a good work around? is it feasible to download latest marlin and select correct options for printrbot plus with no autoleveling etc?
  • 0

I'm an end stop.
Posts: 65
Joined: 2013-Jan-Sat-14-Jan
Reputation: 0

Old firmware for Rev D



Re: Old firmware for Rev D

Postby RetireeJay » 2018-Jan-Mon-16-Jan

See my answer in your other post.
  • 0

Printrbot Plus operational January 2013
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3
User avatar
My next printer is...
Posts: 4957
Joined: 2013-Jan-Wed-13-Jan
Location: Greenville, SC
Reputation: 498

Return to Newbie talk

Who is online

Users browsing this forum: No registered users and 1 guest