The pictures and explanations seem very good to me and would be a great "wiki" style repository to help users track down their own new print issues enjoy
Large selection of print failure pictures
4 posts
• Page 1 of 1
Large selection of print failure pictures
by spitfirehauser » 2014-May-Tue-12-May
Just stumbled across this on the RapRap site thought i would share the link The pictures and explanations seem very good to me and would be a great "wiki" style repository to help users track down their own new print issues
enjoy
The pictures and explanations seem very good to me and would be a great "wiki" style repository to help users track down their own new print issues enjoy
- 0
Steve Hauser
Modified Simple 2014 kit
Modified Simple 2014 kit
-
spitfirehauser - Waiting for extruder temp...
- Posts: 95
- Joined: 2014-Feb-Mon-10-Feb
- Reputation: 4
Re: Large selection of print failure pictures
by jeffro » 2014-May-Tue-13-May
WOW. STICKY THIS ASAP!
I came here to post about holes not being the same size as in CAD. Found the answer i was looking for.
I came here to post about holes not being the same size as in CAD. Found the answer i was looking for.
- 0
- jeffro
- Loading filament...
- Posts: 21
- Joined: 2014-May-Sat-11-May
- Reputation: 0
Re: Large selection of print failure pictures
by Michele31415 » 2014-Jun-Wed-23-Jun
Yes, this post should be sticky alright - as in stuck to the box your printer comes in. I sure wish I'd seen this when I first got mine. It would have saved me a lot of aggravation. Thanks for ointing it out!
- 0
PB+ no. 2548 (Oct. 2012) - This is my Printrbot. There are many like it, but this one is mine.
GT-2 belts and metal pulleys, x&y; Injection molded extruder gears
40 mm. cooling fan, glass bed, LED extruder lights, pilot light
Anti-jam extruder feed tube, roller filament guide, soldered bed heater connection
GT-2 belts and metal pulleys, x&y; Injection molded extruder gears
40 mm. cooling fan, glass bed, LED extruder lights, pilot light
Anti-jam extruder feed tube, roller filament guide, soldered bed heater connection
-
Michele31415 - Honeycomb infill 25%...
- Posts: 255
- Joined: 2012-Oct-Wed-11-Oct
- Location: Planet Claire
- Reputation: 0
Re: Large selection of print failure pictures
by lairdb » 2017-Feb-Thu-16-Feb
Also:
http://support.3dverkstan.se/article/23 ... ting-guide
http://support.3dverkstan.se/article/30 ... ter-prints
...and, although not a troubleshooting guide, I like this article for a discussion of issues and what's achievable in quality:
https://davedurant.wordpress.com/2011/1 ... of-prints/
http://support.3dverkstan.se/article/23 ... ting-guide
http://support.3dverkstan.se/article/30 ... ter-prints
...and, although not a troubleshooting guide, I like this article for a discussion of issues and what's achievable in quality:
https://davedurant.wordpress.com/2011/1 ... of-prints/
- 0
Simple Metal Kit, heated bed
Mods: blower fan with self-remixed
Usually PLA on kapton with AquaNet.
Usually Cura.
Mods: blower fan with self-remixed
Usually PLA on kapton with AquaNet.
Usually Cura.
- lairdb
- Waiting for extruder temp...
- Posts: 81
- Joined: 2015-May-Tue-13-May
- Reputation: 3
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests