New users CAN post pictures
7 posts
• Page 1 of 1
New users CAN post pictures
by RetireeJay » 2014-Apr-Sat-20-Apr
- 0
Printrbot Plus operational January 2013
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
-
RetireeJay - My next printer is...
- Posts: 5014
- Joined: 2013-Jan-Wed-13-Jan
- Location: Greenville, SC
- Reputation: 498
Re: New users CAN post pictures
by Killyin » 2014-Nov-Sun-22-Nov
Sometimes a video is worth more than a picture...especially when it includes sound.
I'm being told that my post requesting help is "too spammy" because it includes an off-site URL.
I'm being told that my post requesting help is "too spammy" because it includes an off-site URL.
- 0
- Killyin
- Waiting to connect to printer...
- Posts: 3
- Joined: 2014-Oct-Wed-12-Oct
- Reputation: 0
Re: New users CAN post pictures
by RetireeJay » 2014-Nov-Mon-08-Nov
When you absolutely must post an off-site URL, the best way to do it is to break it down
www (dot) youtube (dot) yourvideo
www (dot) youtube (dot) yourvideo
- 0
Printrbot Plus operational January 2013
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
-
RetireeJay - My next printer is...
- Posts: 5014
- Joined: 2013-Jan-Wed-13-Jan
- Location: Greenville, SC
- Reputation: 498
Re: New users CAN post pictures
by Mooselake » 2014-Nov-Mon-11-Nov
New users CAN post youtube videos:
The format is pretty specific, so read the friendly manual above for directions. Moose have problems remembering how to post videos, so I use this topic when I need to.
Kirk
The format is pretty specific, so read the friendly manual above for directions. Moose have problems remembering how to post videos, so I use this topic when I need to.
Kirk
- 0
Modified KickStarter Classic Plus 7/2012
KS Thingybot Delta Pro 10/31/16
Creality Ender 3 Pro 12/2019
KS Thingybot Delta Pro 10/31/16
Creality Ender 3 Pro 12/2019
-
Mooselake - My next printer is...
- Posts: 3625
- Joined: 2011-Dec-Tue-23-Dec
- Location: Moose Swamp, Upper Michigan, USA
- Reputation: 177
Re: New users CAN post pictures
by Killyin » 2014-Nov-Mon-21-Nov
No luck, even with the examples in the above post.
- 0
- Killyin
- Waiting to connect to printer...
- Posts: 3
- Joined: 2014-Oct-Wed-12-Oct
- Reputation: 0
Re: New users CAN post pictures
by Mooselake » 2014-Nov-Wed-13-Nov
Post it as youtube dot com etc. and one of us will edit it for you. With that example you should be able to do it in the future.
Here's the unofficial Mooselake anti-spam theme song. Never actually seen a Queen video before. Youtube changes my URLs to https, which won't work; if that happed to you change it to http:.
Kirk
Here's the unofficial Mooselake anti-spam theme song. Never actually seen a Queen video before. Youtube changes my URLs to https, which won't work; if that happed to you change it to http:.
Kirk
- 0
Modified KickStarter Classic Plus 7/2012
KS Thingybot Delta Pro 10/31/16
Creality Ender 3 Pro 12/2019
KS Thingybot Delta Pro 10/31/16
Creality Ender 3 Pro 12/2019
-
Mooselake - My next printer is...
- Posts: 3625
- Joined: 2011-Dec-Tue-23-Dec
- Location: Moose Swamp, Upper Michigan, USA
- Reputation: 177
Re: New users CAN post pictures
by ThereWillBprints2 » 2015-Apr-Thu-04-Apr
That is super nice of you.
- 0
- ThereWillBprints2
- Waiting for extruder temp...
- Posts: 83
- Joined: 2015-Apr-Sun-22-Apr
- Reputation: 1
7 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest