Metal Plus (1504), power supply wires disconnected.

Hardware talk for newbies: questions, advice etc

Metal Plus (1504), power supply wires disconnected.

Postby DaedalusMinor » 2017-Aug-Thu-11-Aug

The white female connector to the printrbot looks to have been overheated and all three black wires to the power supply have become disconnected from the male connector. The only reason I've noticed is because my printrbot stopped printing after maintenance, so it's possible that I just moved the wires out of place while they were weakly connected. I'm hesitant to re-crimp the wires to a new connector, since I don't know much on electronics and wiring. But right now, it seems to be the easiest solution. So, does anyone know where to get the white female connector on the printer? So far I've only found the black male connector. And would re-crimping work? Or is there a better solution? I haven't gotten a response from printrbot support.
  • 0

You do not have the required permissions to view the files attached to this post.
Waiting to connect to printer...
Posts: 3
Joined: 2017-Aug-Thu-11-Aug
Reputation: 0

Metal Plus (1504), power supply wires disconnected.



Re: Metal Plus (1504), power supply wires disconnected.

Postby RetireeJay » 2017-Aug-Thu-20-Aug

I would start over with new connectors on both sides. There's a lengthy post in the forum with part numbers for connector shells, the male & female pins, and even a crimping tool suitable for the purpose. viewtopic.php?f=21&t=4567&p=41427
  • 0

Printrbot Plus operational January 2013
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
User avatar
My next printer is...
Posts: 5014
Joined: 2013-Jan-Wed-13-Jan
Location: Greenville, SC
Reputation: 498

Return to Newbie talk

Who is online

Users browsing this forum: No registered users and 2 guests