Hot end dig into bed after hit homing Z axis

Hot end dig into bed after hit homing Z axis

Postby BTKMUTW » 2015-Jul-Sat-02-Jul

Hi all,

The Z axis of my printrbot 1405 upgrade to 355mm
I just set M211 Z300, M212 Z0 and M500 (Zprobe LED on)
However, The hot end dig into bed after I hit home Z axis
How can I fix it?
  • 0

BTKMUTW
Waiting to connect to printer...
 
Posts: 2
Joined: 2015-Jun-Mon-21-Jun
Reputation: 0

Hot end dig into bed after hit homing Z axis

Sponsor

Sponsor
 

Re: Hot end dig into bed after hit homing Z axis

Postby frankv » 2015-Jul-Sat-02-Jul

Sounds like your Z probe has failed. It's not uncommon for wires from the Z probe to the PrintrBoard to break, or intermittently lose contact.

See this thread http://www.printrbottalk.com/forum/viewtopic.php?f=15&t=10016
  • 0

frankv
First blob a success!
 
Posts: 519
Joined: 2015-Jan-Thu-12-Jan
Reputation: 18


Return to Simple talk (software)

Who is online

Users browsing this forum: No registered users and 1 guest