A Good Profile

A Good Profile

Postby bbrown64 » 2015-Jul-Thu-08-Jul

I want to share a good profile that works for PLA. Currently I am using white PLA. However this same profile works well with Blue as well. I have not tried it with any other color or product.
  • 0

You do not have the required permissions to view the files attached to this post.
Bill Brown
Tulsa, OK
User avatar
bbrown64
Layer 300 of 1234
 
Posts: 308
Joined: 2015-Mar-Thu-14-Mar
Reputation: 5

A Good Profile

Sponsor

Sponsor
 

Re: A Good Profile

Postby Mooselake » 2015-Jul-Mon-08-Jul

I'd add the usual caution - every printer and every spool of plastic is unique and will be different. Someone else's profile can be a good starting point (not to mention an excellent example), but you'll still need to check and possibly adjust speeds, use your measured filament diameters, temps, possibly bed dimensions, etc.

What model and vintage Printrbot is this for?

Kirk
  • 0

Modified KickStarter Classic Plus 7/2012
KS Thingybot Delta Pro 10/31/16
User avatar
Mooselake
My next printer is...
 
Posts: 3589
Joined: 2011-Dec-Tue-23-Dec
Location: Moose Swamp, Upper Michigan, USA
Reputation: 172

Re: A Good Profile

Postby bbrown64 » 2015-Jul-Tue-17-Jul

The printer I use is PB SM model 1403.
  • 0

Bill Brown
Tulsa, OK
User avatar
bbrown64
Layer 300 of 1234
 
Posts: 308
Joined: 2015-Mar-Thu-14-Mar
Reputation: 5

Re: A Good Profile

Postby Mooselake » 2015-Jul-Tue-20-Jul

I should have asked which version of Cura, since there is a bit of an issue with Cura 15 not including PB config files, and your ini file might help somebody out.

Kirk
  • 0

Modified KickStarter Classic Plus 7/2012
KS Thingybot Delta Pro 10/31/16
User avatar
Mooselake
My next printer is...
 
Posts: 3589
Joined: 2011-Dec-Tue-23-Dec
Location: Moose Swamp, Upper Michigan, USA
Reputation: 172

Re: A Good Profile

Postby bbrown64 » 2015-Jul-Mon-08-Jul

I am using the most current version of Cura. It did have the PB Simple Metal profile to choose.
  • 0

Bill Brown
Tulsa, OK
User avatar
bbrown64
Layer 300 of 1234
 
Posts: 308
Joined: 2015-Mar-Thu-14-Mar
Reputation: 5


Return to Simple talk (software)

Who is online

Users browsing this forum: No registered users and 1 guest