Hey Guys
Are there links to where I can download the compiled firmware that was provided by PrintrBot for the simple metal. I plan on upgrading the hotend on it to a E3D V6, but in case things go wrong I want to be able to revert back to previous hardware and firmware.
Where can I download the official printrbot Firmware
3 posts
• Page 1 of 1
Re: Where can I download the official printrbot Firmware
by RetireeJay » 2019-Apr-Wed-08-Apr
You can find compiled versions for several variants of Printrbot at
The Wiki in this forum has that link as well as quite a bit of other information. Note that the Wiki has not been updated in a few years, so use it with caution, but much of the descriptive material in there is still relevant. Where is the Wiki you ask? Just click on the red-beige-and white "Printrbot Wiki" button next to the "Search..." text box.
The Wiki in this forum has that link as well as quite a bit of other information. Note that the Wiki has not been updated in a few years, so use it with caution, but much of the descriptive material in there is still relevant. Where is the Wiki you ask? Just click on the red-beige-and white "Printrbot Wiki" button next to the "Search..." text box.
- 0
Printrbot Plus operational January 2013
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
-
RetireeJay - My next printer is...
- Posts: 5014
- Joined: 2013-Jan-Wed-13-Jan
- Location: Greenville, SC
- Reputation: 498
3 posts
• Page 1 of 1
Return to Simple talk (software)
Who is online
Users browsing this forum: No registered users and 1 guest