Seeking working firmware source for Simple Metal (rev F6)

Seeking working firmware source for Simple Metal (rev F6)

Postby automatonmaker » 2017-Apr-Wed-10-Apr

I've upgraded my Simple Metal (rev F6 Printrboard) to an E3D v6 hot end and Titan extruder (I'm happy to share how I mounted the Titan using a custom-designed, printed mount), and now need to edit the thermistor type and max temp values. The versions of firmware I've found so far on Github don't compile without errors using the latest Arduino IDE with Teensyduino added in, and selecting the Teensy board. So far Printrbot has not been very helpful. Does anyone have a link to the right source code that I can compile and then flash?
  • 0

automatonmaker
Waiting to connect to printer...
 
Posts: 1
Joined: 2017-Apr-Wed-10-Apr
Reputation: 0

Seeking working firmware source for Simple Metal (rev F6)

Sponsor

Sponsor
 

Re: Seeking working firmware source for Simple Metal (rev F6

Postby cbxbiker61 » 2017-Jun-Wed-16-Jun

I could get you a copy of my Marlin 1.1.3 code once I have embedded link permission. See my new post about Marlin 1.1.3 Simple code.
  • 0

cbxbiker61
Levelling print bed...
 
Posts: 28
Joined: 2017-Jun-Wed-00-Jun
Reputation: 0

Re: Seeking working firmware source for Simple Metal (rev F6

Postby RetireeJay » 2017-Jun-Wed-16-Jun

I find that the combination of editing with Notepad++ and compiling with PlatformIO is far, far superior to trying to use the Arduino IDE. It may take a little bit of tweaking, but I've been able to get even the latest version of Marlin to compile under this system. It's important to correctly define the motherboard both in the Marlin code and in the PlatformIO folder that you add to the Marlin folder; if they both say the same thing, then you should be able to compile.
See viewtopic.php?f=22&t=10160
  • 0

Printrbot Plus operational January 2013
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
User avatar
RetireeJay
My next printer is...
 
Posts: 4709
Joined: 2013-Jan-Wed-13-Jan
Location: Greenville, SC
Reputation: 477


Return to Simple talk (software)

Who is online

Users browsing this forum: No registered users and 1 guest