Page 1 of 1

Is nozzle size 0.4mm?

PostPosted: 2013-May-Fri-19-May
by rsilvers
Is the nozzle size 0.4mm?

Re: Is nozzle size 0.4mm?

PostPosted: 2013-May-Fri-20-May
by RetireeJay
The Getting Started Guide says that all Printrbots currently ship with 0.4mm nozzles.
The convention for identifying nozzles is based on notches (or "rings") cut into the sides (vertices) of the hexagonal brass "nut".
No notch = 0.5mm
1 notch = 0.4mm
2 notches = 0.35mm