What kind of hardware (screws n bolts) does the simple metal
3 posts
• Page 1 of 1
What kind of hardware (screws n bolts) does the simple metal
by Flordonwrath » 2018-Apr-Sat-06-Apr
.
- 0
Last edited by Flordonwrath on 2018-Apr-Sat-10-Apr, edited 1 time in total.
- Flordonwrath
- Loading filament...
- Posts: 13
- Joined: 2018-Apr-Sat-06-Apr
- Reputation: 0
Re: What kind of hardware (screws n bolts) does the simple m
by RetireeJay » 2018-Apr-Sat-07-Apr
You can google "Printrbot simple metal BOM" and find the Bill of Materials easily. It lists all the parts you should have.
And you can go to Printrbot.com and pretty easily find the instructions for assembling the Printrbot Simple Metal Kit. A PDF version is here:
And you can go to Printrbot.com and pretty easily find the instructions for assembling the Printrbot Simple Metal Kit. A PDF version is here:
- 0
Printrbot Plus operational January 2013
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
-
RetireeJay - My next printer is...
- Posts: 5014
- Joined: 2013-Jan-Wed-13-Jan
- Location: Greenville, SC
- Reputation: 498
Re: What kind of hardware (screws n bolts) does the simple m
by Flordonwrath » 2018-Apr-Sat-08-Apr
- 0
- Flordonwrath
- Loading filament...
- Posts: 13
- Joined: 2018-Apr-Sat-06-Apr
- Reputation: 0
3 posts
• Page 1 of 1
Return to Simple talk (hardware)
Who is online
Users browsing this forum: No registered users and 6 guests