Extruder fail

Extruder fail

Postby MICHAELB » 2017-Apr-Sun-19-Apr

I'm printing for the first time. My 20mm cube had a square base but was short; printed it at 185. Using the material the printer came with (simple 2014).

On the second print (different model), the output started looking like angelhair; finer and finer until it stopped extruding. The feeder "click click clicks", telling me it's forcing the material but it won't go through.

What's going on?
  • 0

Waiting to connect to printer...
Posts: 1
Joined: 2017-Apr-Sun-19-Apr
Reputation: 0

Extruder fail



Re: Extruder fail

Postby RetireeJay » 2017-May-Mon-10-May

There's too much back-pressure and the extruder is jamming. You can search for extruder jam in this forum and find hundreds of hits! You might need a higher extruder temperature to liquefy the plastic better.
  • 0

Printrbot Plus operational January 2013
Brass threaded rods (5/16" X 18) & nuts for Z axis
GT2 belts & pulleys
Cable chain to reduce probability of fatigue failure in wires
E3D V5 Hot End, 0.4mm nozzle, also 0.8 and 0.25 in use occasionally
PB fan mount + 40mm fan -- using printed mount adapter, not the E3D supplied fan
Injection molded extruder gears
Optical Z "endstop" (custom designed and built)
Have used many pounds of T-Glase filament. Now also doing some work with Ninjaflex SemiFlex
Print on glass with Scotch Craft Stick or other glue stick
"My next printer is..." Prusa i3 MK3, upgraded to MK3S
User avatar
My next printer is...
Posts: 5014
Joined: 2013-Jan-Wed-13-Jan
Location: Greenville, SC
Reputation: 498

Return to Simple talk (hardware)

Who is online

Users browsing this forum: No registered users and 1 guest